Skip to main content

Splice Tab

The splice tab is a useful tool when estimating elevations that are taller than the stock lengths of your verticals and jambs. WinBidPro allows you to enter up to 10 splices in your verticals. Adding a splice location will be applied to all verticals in the elevation.

Add a Splice#

  1. Enter the height (in inches) for each splice location. All points are measured from the ground (0 inches).
  2. Click Redraw. You will now be able to see your new splice in the drawing window

img

note

No gap is calculated for the specified splices

Edit this page